Cardinal 190 Series - Page 68

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 58
HoUr= (Time Print Location)
Press the TARE  key to show the current setting for the Time
Print Location. If the setting displayed is acceptable, press the
TARE  key again to save it. Otherwise, use the Fn/ and
UNITS/ keys to enter a new location and then press the
TARE  key to save it.
dAtE= (Date Print Location)
Press the TARE  key to show the current setting for the Date
Print Location. If the setting displayed is acceptable, press the
TARE  key again to save it. Otherwise, use the Fn/ and
UNITS/ keys to enter a new location and then press the
TARE  key to save it.
groSS= (Gross Weight Print Location)
Press the TARE  key to show the current setting for the Gross
Weight Print Location. If the setting displayed is acceptable,
press the TARE  key again to save it. Otherwise, use the Fn/
and UNITS/ keys to enter a new location and then press the
TARE  key to save it.
tArE= (Tare Weight Print Location)
Press the TARE  key to show the current setting for the Tare
Weight Print Location. If the setting displayed is acceptable,
press the TARE  key again to save it. Otherwise, use the Fn/
and UNITS/ keys to enter a new location and then press the
TARE  key to save it.
nEt= (Net Weight Print Location)
Press the TARE  key to show the current setting for the Net
Weight Print Location. If the setting displayed is acceptable,
press the TARE  key again to save it. Otherwise, use the
Fn/ and UNITS/ keys to enter a new location and then press
the TARE  key to save it.