Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
EoP= (End-Of-Print Line Feeds)
At the end of a data transmission to a printer, the indicator can
transmit a pre-selected number of line feed commands to space the
paper in the printer to the desired position for withdrawal or for the
next print.
Press the TARE key to show the current setting for the End Of
Print Line Feeds. If the setting displayed is acceptable, press the
TARE key again to save it.
Otherwise, use the Fn/ and UNITS/ keys to enter a new
number of End-Of-Print linefeeds and then press the TARE key
to save it. Allowable settings are: 0 through 99
To Next Page
Loading...