Cardinal 190 Series - Page 82

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 72
Ti-da= (Time and Date)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it. Allowable values are:
Yes
No
Time and Date is Enabled
Time and Date is Disabled
pHoLd= (Peak Hold Function)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it. Allowable values are:
Yes
No
Peak Hold Function is
Enabled
Peak Hold Function is
Disabled
CHEC= (Checkweigher Function)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it. Allowable values are:
Yes
No
Checkweigher Function is
Enabled
Checkweigher Function is
Disabled
aCt= (Live Weight Function)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it. Allowable values are:
Yes
No
Live Weight Function is
Enabled
Live Weight Function is
Disabled