Cardinal 190 Series - Page 86

Model 190 Installation, Technical and Operation
8400-M022-O1 Rev J
Page 76
aCCpt= (Checkweigher “Accept” Backlight Color)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it. Allowable settings are:
0 = No Backlight
1 = Red Backlight
2 = Green Backlight
3 = Yellow Backlight
4 = Blue Backlight
5 = Pink Backlight
oer= (Checkweigher “Over” Backlight Color)
Press the TARE  key to show the current setting. If the setting
displayed is acceptable, press the TARE  key again to save it.
Otherwise, use the Fn/ key to toggle to a new setting and then
press the TARE  key to save it. Allowable settings are:
0 = No Backlight
1 = Red Backlight
2 = Green Backlight
3 = Yellow Backlight
4 = Blue Backlight
5 = Pink Backlight