212/212X Installation & Technical
8200-M639-O1 Rev D 09/14
6. The weighing is now complete and the animal can be
removed from the scale.
7. If you are using Standard Mode (A-HLD= 1) the held weight will
be released once the scale weight drops below the preset
threshold.
8. If you are using Advanced Mode (A-HLD= 2), the held weight
will not be released. Instead, the weight will continue to hold
on the indicator until a new hold weight is acquired (i.e.
another animal is weighed).
9. Repeat these steps for subsequent animal weights. If you
wish to continue using the stored tare weight, skip steps 1-3.
To Next Page
Loading...