212/212X Installation & Technical
8200-M639-O1 Rev D 09/14
5. The indicator will then prompt for the starting DFC counter COUNT=.
Press ENTER to display the default starting value. If you wish to
modify the starting count value enter your desired starting value then
press ENTER. After storing the fill counter value, the indicator will
return to the weight display (you can tell this whenever the MEM
display annunciator turns off).
Reviewing Memory using the RECALL key:
1. From the weight display, press the RECALL key. You are now in the
ID Review menu. You will see the first Box ID displayed. Notice which
display annunciators are visible.
a. The MEM annunciator signifies the displayed information is being
read from memory.
b. The ID annunciator signifies the displayed information is an ID
name.
c. The 1 annunciator signifies that the displayed ID is from list 1 (Box
ID List)
2. Pressing the NET/GROSS key will display the remaining net weight
stored with the previously displayed ID (This feature is also available
for in the Box-Tracker DFC mode). Notice now which display
annunciators are active.
a. The MEM annunciator signifies the displayed information is being
read from memory.
b. The 1 annunciator signifies that the displayed information is from ID
list 1.
c. The UNITS (lb or kg) annunciators the unit of the displayed weight.
d. The NET annunciator signifies the displayed value is a net weight.
To Next Page
Loading...