The PRESET key allows the operator to change
different presets for different D-OUT settings.
Thres= This is the threshold weight used with
the Auto Hold feature (this prompt only
appears when D-OUT = is 1, 2, 3, 11, 12 or 13
and A-HLD= 1 or 2).
PSET1=, PSET2=, and PSET3=, are for D-OUT = 1, 2,
or 3 and 11, 12 or 13 respectively.
D-OUT= 4 or 14 is for Digital Fill Control. If this is
selected, pressing the PRESET key will
display the following prompts:
(if SPEED= 1)
FILL= Weight at which PWC1 will shut off (fill
weight)
(if SPEED= 2)
FAST= Fast filling weight
SLOW= Slow filling weight
CHATR= Incremental weight for chatter gate
open and close (if GATE= 3)
TRIM= Anticipated weight of material still falling
onto scale in order to obtain more accurate fill
weight.
To Next Page
Loading...