The NET/GROSS key is used to toggle between
the Gross and Net weight modes. The selected
mode is indicated by turning on the appropriate
annunciator on the display.
Note that if no valid tare weight has been
entered, pressing the NET/GROSS key will
cause a momentary display error (notArE) and
the indicator will remain in the Gross weight
mode.
Pressing the RECALL key will cycle through the
stored IDs in numerical/alphabetical order one
(1) at a time.
NOTE: While cycling through IDs, all other keys
except ENTER, , RECALL and MEM will be
disabled.
Pressing this key while memory is empty will
display “No Ids”
If an ID has already been previously selected,
the indicator will start cycling through the list at
selected location.
Pressing the PRINT key while displaying an ID
using the RECALL key will print that ID file
information.
To Next Page
Loading...