212/212X Installation & Technical
8200-M639-O1 Rev D 09/14
These keys are used to enter alphanumeric data
during the setup and calibration as well as during
normal operation of the indicator.
To enter letters, you must press the key in
succession until the desired letter is displayed.
This is similar to the way a cell phone keypad
operates. (Ex: If you want to enter the letter C,
you would need to press the 2 key four times).
The 1/YES key is a dual function key.
During setup and configuration as well as normal
operations, it is used to enter numeric data.
In addition, it is used to answer YES (1 = YES) to
various prompts during setup and configuration
as well as during normal operations.
The 0/NO key has several functions.
During setup and configuration as well as normal
operations, it is used to enter numeric data.
In addition, it is used to answer NO (0 = NO) to
various prompts during setup and configuration
as well as during normal operations.
Pressing the 0/NO key after the F key will enter
the Setup and Configuration mode where the
indicator Setup and Configuration parameters
can be changed as well as calibration performed.
To Next Page
Loading...