212/212X Installation & Technical
8200-M639-O1 Rev D 09/14
A cLr= (Auto Clear ID)
The a clr= (Auto Clear ID) prompt determines whether the ID is
automatically cleared after printing the ticket. Note that it is only
displayed when id= YES is selected.
With the display showing a clr=, press the ENTER key to show the
current setting. If the setting displayed is acceptable, press the ENTER
key again to save it. Otherwise, using the numeric keys, 0/NO or 1/YES,
enter the new setting and then press the ENTER key to save it.
Automatically clears the ID
after the ticket has printed.
ID is not cleared when
ticket prints and can be
used for next transaction.
To Next Page
Loading...