8200-M698-O1 Rev B 225 Installation and Technical
104
ID STORAGE OPERATION, CONT.
PERMANENT ID
Two Pass Transaction (Two-Step Operation), Cont.
MULTIPLE IDs
(Empty or Loaded Container With Two ID Prompts)
Step 1
1. With the indicator in normal operations mode, place the loaded container on the scale
2. Press the ID key. The display will change to show ID1= (the Prompt 1 name entered
in ID Storage Setup).
3. Enter up to a 12-digit alphanumeric ID string and press the ENTER key.
4. The display will momentarily show Ref= (and the name associated with the ID) then
change to ID2= (the Prompt 2 name entered in ID Storage Setup).
If only one ID prompt is needed AND a ticket is desired, press the PRINT key to
store the weight and print the ticket. The display will show Print Pass 1.
Proceed to Step 6.
5. If two ID prompts are required, enter up to a 12-digit alphanumeric string for the second
ID prompt.
If only two ID prompts are needed AND a ticket is desired, press the PRINT key to
store the weight and print the ticket. The display will show Print Pass 1.
Proceed to Step 6.
If a ticket is NOT desired, press the ENTER key to store the weight. Proceed to
Step 6.
6. The indicator will return to the Gross weight display.
Step 2
1. With the indicator in normal operations mode, place the loaded container on the scale
2. Press the ID key. The display will change to show ID1= (the Prompt 1 name entered
in ID Storage Setup).
3. Enter up to a 12-digit alphanumeric ID string and press the PRINT key.
4. The indicator will print a ticket; display Print Pass 2 before returning to the Gross
weight display.
5. The Net weight will be added to the accumulator of the entered ID string and the ticket
printed will show the TIME, DATE, ID, TIME/DATE of Stored Tare weight, the Gross,
Tare, and Net weights.
To Next Page
Loading...
