8200-M698-O1 Rev B 225 Installation and Technical
108
ID STORAGE OPERATION, CONT.
TEMPORARY ID
Automatically Assign A Temporary ID String (One ID Prompt)
First Pass
1. With the indicator in normal operations mode, press the ID key.
2. The display will change to show ID1=.
3. Press the PRINT key. If a ticket is NOT desired, press the ENTER key instead.
4. A temporary ID string will be assigned and the weight stored.
5. A temporary ticket showing the ID string and weight will be printed and the display will
show Print Pass 1.
Second Pass
1. With the indicator in normal operations mode, press the ID key.
2. The display will change to show ID1=.
3. Enter the ID string printed on the ticket and then press the PRINT key.
4. The indicator will print a ticket, display Print Pass 2, and delete the ID string.
Multiple IDs (Temporary ID String with Two ID Prompts)
First ID Automatically Assigned, Second ID Manually Entered
First Pass
1. With the indicator in normal operations mode, press the ID key.
2. The display will change to show ID1=.
3. Press the ENTER key.
4. The display will change to show ID2=.
5. Enter up to a 12-digit alphanumeric ID string and press the PRINT key. If a ticket is
NOT desired, press the ENTER key instead.
6. The automatically assigned temporary ID string, the manually entered ID, and the
weight will be stored.
7. A temporary ticket showing the ID strings and weight will be printed and the display will
show Print Pass 1.
Second Pass
1. With the indicator in normal operations mode, press the ID key.
2. The display will change to show ID1=.
3. Enter the ID string printed on the ticket and then press the PRINT key.
4. The indicator will print a ticket, display Print Pass 2, and delete the ID string.
To Next Page
Loading...
