Cardinal 225 - Page 122

8200-M698-O1 Rev B  225 Installation and Technical
114
ACCUMULATORS, CONT.
Count Accumulators
To view the COUNT accumulator:
1. Press the ACCUM key. The display will change to show ACCUMULATOR=.
2. Press the COUNT key.
3. The display will change to show the Piece Count Accumulator value.
4. Press the ENTER key to return to normal operation.
To print the COUNT accumulator:
1. Press the ACCUM key. The display will change to show ACCUMULATOR=.
2. Press the COUNT key.
3. The display will change to show the Piece Count Accumulator value.
4. Press the PRINT key.
5. The value for the Piece Count accumulator will be printed.
6. Press the ENTER key.
7. The indicator will return to normal operation when printing has been completed.
To zero the COUNT accumulator:
1. Press the ACCUM key. The display will change to show ACCUMULATOR=.
2. Press the COUNT key.
3. The display will change to show the Piece Count Accumulator value.
4. Press the ZERO key.
5. The value for the Piece Weight accumulator will be reset to zero.
5. Press the ENTER key to return to normal operation.