8200-M698-O1 Rev B 225 Installation and Technical
121
CONTINUOUS OUTPUT FORMATS, CONT.
Weight on Demand Format
If continuous output has not been selected for the COM Ports (CONT=NO), the 225 indicator
will respond to a weight request (ENQ) as follows.
The host device (computer) sends:
ENQ - (hex 05)
The 225 will respond:
<s><xxxxxx><d><uu><m><cc><cr>
Where:
s = Sign "-" = negative, " " (blank) = positive
xxxxxx.xxx = Weight Six digits
d = Decimal point Added to string if enabled in setup
uu = Units tn, lb, oz, t, kg, g
m = Mode G = Gross, N = Net
cc = Weight Status OC = over capacity
CZ = center of zero
MO = motion
ee = weight not currently being displayed
cr = Carriage Return (hex 0D)
To Next Page
Loading...
