8200-M698-O1 Rev B 225 Installation and Technical
122
CONTINUOUS OUTPUT FORMATS, CONT.
SMA Weight on Demand Format
If continuous output has not been selected for the COM Ports (CONT=NO), the 225 indicator
will respond to a SMA weight request as follows.
The host device (computer) sends:
<lf> W <cr>
The 225 will respond:
<lf><s><r><n><m><f><xxxxxx.xxx><uuu><cr>
Where:
lf = Line Feed
s = Flags Z= center of Zero, O = Over cap, E = zero Error,
e = weight not currently being displayed
r = Range 1, 2, 3, ...
n = Mode G = Gross, T = Tare, N = Net
m = Motion M = Motion, " "(blank) = no motion
f = Custom Custom flag
xxxxxx.xxx = Weight Six digits with decimal point
uuu = Units ton, lb, oz, t, kg, g
cr = Carriage Return (hex 0D)
To Next Page
Loading...
