Cardinal 225 - Print Setup

8200-M698-O1 Rev B  225 Installation and Technical
137
PRINT SETUP
With the indicator ON, press the SHIFT key and then press the Navigation ENTER key (red
square key in center of the Navigation arrows). The display will change to show the
SETUP/REVIEW MENU.
SETUP/REVIEW MENU
1.ENTER CALIBRATION AND SETUP
2.VIEW AUDIT TRAIL COUNTERS
3.CALIBRATE SCALE 1 8.SCALE ID=00
9.DEL CUSTOM TICKET
10.PRINT SETUP
Enter Selection: 1 ^ EXIT
10.PRINT SETUP(Print Setup)
With the SETUP/REVIEW MENU displayed, press the 1 and 0 keys and then the ENTER
key to print a hard copy of the 225 SETUP PARAMETERS.
NOTE: The hard copy will print using the PRINTER SERIAL port with the parameters
selected during Calibration and Setup and return to the SETUP/REVIEW MENU.
Press EXIT (Navigation Keys  UP Arrow) to reset the indicator and return to normal
operations.