Cardinal 225 - Part Identification

8200-M698-O1 Rev B  225 Installation and Technical
140
PART IDENTIFICATION
(Front Assembly)
ITEM # QTY. PART NUMBER DESCRIPTION
1 18 6013-0039 NUT HEX # 6-32
2 1 6013-0297 NUT # 10-32 HEX
3 1 6024-0037 WASHER LOCK HELICAL SP # 10 REG SS
4 12 6024-1078 WASHER FLAT # 6 NEOPRENE BACKING SS
5 1 6610-5002 GROUND LUG L-35
6 2 6610-5007 CABLE CLIP, 1” x 1” GREY
7 6 6680-0004 WASHER LOCK INT TOOTH # 6 TYPE A Z-PL
8 6 6680-0219 SPACER # 6 X .813 NYLON
9 1 8200-B309-08 GASKET FOR 220 ENCLOSURE
10 1 8200-C312-0A WELDMENT: BEZEL FOR 220
11 1 8200-D160-0A PCB ASS’Y 225-USA CONTROLLER
12 1 8200-D160-1A PCB ASS’Y 225-NWS (AUSTRALIA) CONTROLLER

1 8200-D160-2A PCB ASS’Y 225-SCD (USA) CONTROLLER

1 8200-D160-3A PCB ASS’Y 225-SNAP (USA) CONTROLLER
13 1 8200-D160-4A PCB ASS’Y 225-INTL CONTROLLER

1 8200-D160-5A PCB ASS’Y 225-SCD (INTL) CONTROLLER
14 1 8200-D160-6A PCB ASS’Y 225-USA-ICAN CONTROLLER
15 1 8200-D160-7A PCB ASS’Y 225-INTL-ICAN CONTROLLER
16 1 8200-D360-08 KEYPAD: 225 DWI
17 1 8200-D365-0A WELDMENT: ENCLOSURE, FRONT
18 1 8200-D379-08 KEYPAD: 225 AU
19 4 6021-0661 SCW PAN-HEAD..MACHINE-SCW 06-32X.250
20 1 8200-C384-0A PCB ASS’Y 225CANP CAN INTERFACE
21 1 8200-C384-1A PCB ASS’Y 225CANG CAN INTERFACE
 Not Shown