Cardinal 225 - Main PC Board I;O Functions Table; Relay Box Cable Wire Number to Relay Number Table

8200-M698-O1 Rev B  225 Installation and Technical
28
INSTALLATION, CONT.
Main PC Board I/O Functions Table
Refer to Figure No. 8 for the AC Input Relay board, Figure No. 9 and Figure No. 10 for the AC
Output Relay boards, Figure No. 11 and Figure No. 12 for the DC Output Relay boards and
Figure No. 13 for the Main PCB.
INPUTS OUTPUTS
PWC CHECKWEIGHER DFC BATCHER
P17 INPUTS P19 Presets Check 3 Check 5 1 Speed 2 Speed Batch 1 Batch 2
2
ZERO
2
PWC 1 Under Under Fill Fast Fill 1 Fast 1
3
TARE
3
PWC 2 Accept Lo Under Slow Fill 2 Slow 1
4
Gross/Net
4
PWC 3 Over Accept Fill 3 Fast 2
5
PRINT
5
PWC 4 Lo Over Fill 4 Slow 2
6
PAUSE
6
PWC 5 Over Fill 5 Fast 3
7
STOP
7
PWC 6 Fill 6 Slow 3
8
START
8
PWC 7 Fill 7 Fast 4
9
DUMP
9
PWC 8 Fill 8 Slow 4
P18 Presets Check 3 Check 5
1 Speed 2 Speed
Batch 1 Batch 2
2
PWC 9 Fill 9 Fast 5
3
PWC 10 Fill 10 Slow 5
4
PWC 11 Fill 11 Fast 6
5
PWC 12 Fill 12 Slow 6
6
PWC 13 Fill 13 Fast 7
7
PWC 14 Fill 14 Slow 7
8
PWC 15 Fill 15
9
PWC 16 Dump Dump Dump Dump
Relay Box Cable Wire Number to Relay Number Table
The relay box cable wire numbers correspond to the indicator main PC board remote input
(P17) and output (P19 and P18) terminal connection pins.
CABLE WIRE
NUMBER
RELAY NUMBER
(Set Proper Jumpers)
CABLE WIRE
NUMBER
RELAY NUMBER
(Set Proper Jumpers)
1 +SRC (For AC Input Relays) 6 5
2 1 7 6
3 2 8 7
4 3 9 8
5 4 10 GND