Cardinal 225 - Setup Menu #2; Serial Input;Output Setup

8200-M698-O1 Rev B  225 Installation and Technical
50
CALIBRATION AND SETUP, CONT.
SETUP MENU #2
SERIAL INPUT/OUTPUT SETUP
With SETUP MENU #1 displayed, press NEXT (Navigation Keys  Down Arrow) to proceed to
SETUP MENU #2.
SETUP MENU #2
1. SERIAL
2. DIO
3. PRINT TABS
4. SETUP SCALE 1
5. CALIBRATE 1
Enter Selection: 0 ` NEXT ^ PREV
1. SERIAL (SERIAL INPUT/OUTPUT)
With SETUP MENU #2 displayed, press the 1 key and then the ENTER key to proceed to
the Serial Menu.
Serial Menu
1. COM0
2. COM1
3. COM2
4. COM3
Enter Selection: 0 ^ EXIT
1. COM0 (COM0)
With the Serial Menu displayed, press the 1 key and then the ENTER key to proceed to the
COM0 SETUP MENU.
COM0 SETUP MENU
1. BAUD=X XXXXXX 6. TYPE=X XXXXXXXXXX
2. PARITY=X XXXX 7. SCALE = 0
3. BITS=X 8. Gross Only = NO
4. STOPS=X
5. CONT=XXX
Enter Selection: 0 ^ EXIT