8200-M698-O1 Rev B 225 Installation and Technical
1
SPECIFICATIONS
Power Requirements: 100 to 240 VAC (50/60 Hz) at 0.4A Max.
Enclosure Type: Stainless Steel wall or desk-mount
Enclosure Size: 10 7/8"W x 8 3/16"H x 3 1/8"D
(276mm W x 208mm H x 79mm D)
Weight: 9.2lbs (Size and Weight DOES NOT include Gimbal)
Operating Environment: Temperature: 14 to 104 ºF (-10 to +40 ºC)
Humidity: 90% non-condensing (maximum)
Display: 240 x 64 (5” x 1.33”) Graphics LCD w/ LED Backlight
Transducer Excitation: 12 VDC
Signal Input Range: 1.0 mV min. to 40 mV max. (with dead load boost)
Scales 1 ea Standard, 3 ea with optional 225-DS Dual Scale Input Board
Number of Load Cells: 14 each, 350-ohm load cells
Load Cell Cable Length:
1,500 feet maximum (requires the use of sense lines). Consult
factory for other requirements
30 feet maximum without sense lines
Division Value: Commercial: 1, 2, or 5 x 10, 1, 0.1, 0.01, 0.001 and 0.0001
Non-commercial: 0 to 99
Sensitivity:
NON-COMMERCIAL
NTEP
CANADA
OIML
0.15 uV/e
0.3uV/e (Class III/IIIL)
0.3uV/e (Class III/IIIHD)
0.7 uV/e (Class III)
Scale Divisions:
NON-COMMERCIAL
NTEP
CANADA
OIML
100 to 240,000
100 to 10,000 (Class III/IIIL)
100 to 10,000 (Class III/IIIHD)
100 to 10,000 (Class III)
Internal Resolution: 1 part in 16,777,216
Tare Capacity: Six Digits (999,999)
Sample Rate: 1 to 100 samples per second, selectable
Auto Zero Range: 0.5 or 1 through 9 divisions
Weighing Units: Tons, Pounds, Ounces, Tonnes ”Metric Tons”, Kilograms, Grams,
Keypad: Membrane type with 60 color-coded keys
Standard I/O: 4 ea Serial I/O Ports configured as:
3 ea bi-directional RS-232 ports or 3 ea 20mA output-only ports
1 ea bi-directional 20mA port
1 ea output only RS-232/20mA port
8 ea Remote Isolated Inputs
16 ea Remote Isolated Outputs
To Next Page
Loading...
