Cardinal 225 - Setup Menu #3; Accumulators; Back Light

8200-M698-O1 Rev B  225 Installation and Technical
86
CALIBRATION AND SETUP, CONT.
SETUP MENU #3
With SETUP MENU #2 displayed, press NEXT (Navigation Keys  Down Arrow) to proceed to
SETUP MENU #3.
SETUP MENU #3
1. G/N ACCUMS=XXX 6. KEY LOCKOUT
2. BACK LITE= X 7. LRPort=COM3
3. PASSWORD
4. 2XX-
5. BADGE RDR
Enter Selection: 0 ^ PREV ` EXIT
ACCUMULATORS
1. G/N ACCUMS (GROSS/NET ACCUMULATORS)
With the SETUP MENU #3 displayed the current setting for the G/N ACCUMS=
parameter will be shown. Note that XXX is the current value. If the setting displayed is
acceptable, proceed to the next setup parameter.
Otherwise, press the 1 key, the ENTER key, YES or NO (on the soft keys) and then the
ENTER key to save the new setting and return to the SETUP MENU #3.
G/N ACCUMS=YES G/N ACCUMS=NO
Gross and Net Accumulators
are Enabled
Gross and Net Accumulators
are Disabled
BACK LIGHT
2. BACK LITE (BACKLIGHT TURN-ON LEVEL)
With the SETUP MENU #3 displayed the current setting for the BACK LITE= parameter
will be shown. Note that XX is the current value. If the setting displayed is acceptable,
proceed to the next setup parameter.
Otherwise, press the 2 key and then the ENTER key. The display will change to show the
current light level (Lights= XX).
SETUP MENU #3
Lights= XX
BACK LITE = XX