Carel heaterSteam UR006 - Material Supplied with the Appliance; Technical Data Plate; Hydraulic Circuit

9
ENG
“heaterSteam” +0300075EN - rel. 1.2 - 29.09.2015
Caution: in models UR020...UR080 open the electrical
compartment of the humidi er using the slotted lock.
Fig. 1.h
1.8 Material supplied with the appliance
Once the packaging opened and the front panel removed, check
if there is a:
screws and anchor
kit for wall mounting
only for models UR020...UR080: Code
FWHDCV0003 back  ow prevention valve
with connection tube
1.9 Technical data plate
Humidi ers can be identi ed by means of the technical plate placed on
the partition wall of the electrical cabinet.
MOD.
A
Vac
Hz
PH
kW
kg/h
IP
Date
Part No.
IP
Date
Part No.
Serial No.
Rev.
MADE IN ITALY
CAREL INDUSTRIES
Via dell'Industria, 11, 35020 Brugine
(Padova) Italy
Fig. 1.i
Note: tampering, removal, lack of the identi cation plate or other
does not allow the safe identi cation of the product and will
make any installation or maintenance operation to be performed di cult.
1.10 Hydraulic circuit
Models UR002 – UR013
31 2
5
4
7
8
6
9
10
16
17
12
11
19
18
15
14
Fig. 1.j
Models UR020 – UR080
16
1
5
7
12
19
17
14
13
9
18
6
Fig. 1.k
1 Anti-foaming sensor 11 Drain tube tempering (*)
2 Over ll diaphragm 12 Drain valve tempering (*)
3 Fill diaphragm 13 Inlet valve
4 Feeding tank 14 Drain pump
5
Electrodes for conductivity meas-
urement
15 Anti-adhesive  lm (**)
6 Equaliser pipe 16 Overtemperature sensors (PTC)
7 Feeding pipe 17 Heaters
8 Fill-up pipe 18
Water temperature sensor (NTC)
(**)
9 Level sensor 19 Thermal insulation cover (**)
10 Over ow pipe
(*) for the units equipped with it
(**) for full option modules only