Carel heaterSteam - Main Menu Navigation

29
ENG
“heaterSteam” +0300080EN - rel. 1.0 - 27.04.2016
6.12 Main menu
The parameters can be modifi ed using the keypad: press to access
and UP/DOWN to scroll the main menu.
Fig. 6.f
Main menu icons:
A. Clock
B.
Scheduler
C. Alarm thresholds
D.
Inputs/outputs
E.
Settings
Tab. 6.d
A. Clock: current time/date and time zone setting.
B. Scheduler: hourly and daily time band setting.
C. Alarm thresholds: minimum and maximum threshold setting for the main
room probe and the maximum threshold for the limit probe.
D. Inputs/outputs:
Display analogue probe readings main probe
limit probe
preheating probe (NTC)
conductivity
Digital input status remote on/off
motor protector
level sensor: low
level sensor: high
foam sensor
Analogue outputs current production
Digital output status unit on/off
contactor
drain pump
fi ll valve
SSR/fan
Foam sensor read value
foam threshold?
E. Settings: once having entered the Settings menu, login is required.
Use password 0044 to enter the Service settings.
Use password 0077 to enter the Installer settings.
Settings menu icons:
Index Icon Menu Menu type Controller type
A.
Control
Installer
Service
heaterSteam process
heaterSteam titanium
B.
Functions
Installer
Service
heaterSteam process
heaterSteam titanium
C. Confi guration
Installer heaterSteam process
heaterSteam titanium
D.
Network
Installer heaterSteam process
heaterSteam titanium
E.
Backup
Installer heaterSteam titanium
F.
Manual mode
Installer
Service
heaterSteam process
heaterSteam titanium
G.
Initialisation
Installer
Service
heaterSteam process
heaterSteam titanium
H.
Supervision
Installer heaterSteam process
heaterSteam titanium
I.
Logout
Installer
Service
heaterSteam process
heaterSteam titanium