14
Heosone +050002740 rel. 1.1 - 17.05.2021Installation
ENG
3.2.4 Cable arrangement for correct installation
Fig. 3.f shows an example of correct cable installation. To ensure correct closing of the IP20/IP44 cover, it is recommended to
use 90° spades for terminals L, N, PE. It is also recommended to fasten the cover closing screw to a tightening torque of 2 Nm.
To facilitate installation in application, special holes are provided on the container for plastic cable ties to pass through.
50002730_006_R01
Fig. 3.f
To Next Page
Loading...
