Carel humiSonic - Main Electrical Panel Structure and Positioning

16
ENG
“humiSonic ventilation” +0300063EN - rel. 1.3 - 14.05.2021
3.5 “Main” electrical panel
STRUCTURE
OUTSIDE
1
4
7
5
6
2
3
Fig. 3.i
INSIDE
8
10
7
1
9
11
Fig. 3.j
Key
1 Terminal 7 Exhaust air fan
2 Cover with lock 8 Terminal block
3
Knock-outs for additional cable
glands (installer’s responsibility)
9 Transformer
4 Cable glands 10 Control board
5 Air intake openings 11 Power supply
6 ON/OFF switch
DIMENSIONS - mm (in)
262 (10.3)
361
(14.2)
252 (9.9)
Fig. 3.k
POSITIONING
The electrical panel is designed for wall-mounting and features forced
ventilation for cooling. See the fi gure for the minimum clearances in mm
(in) that ensure suffi cient air fl ow and change inside the electrical panel.
<0,5°
Level
≥ 500
(19.7”)
≥ 500
(19.7”)
≥ 500
(19.7”)
≥ 500
(19.7”)
Fig. 3.l
Weight
UQ05C10000 Main Electrical Panel 300 W -110 V 9,5 Kg / 20,9 lbs
UQ05CD0000 Main Electrical Panel 300 W -230 V 9,5 Kg / 20,9 lbs
UQ09C10000 Main Electrical Panel 600 W -110 V 9 Kg / 19,8 lbs
UQ09CD0000 Main Electrical Panel 600 W -230 V 10 Kg / 22 lbs
UQ18C10000 Main Electrical Panel 1200 W -110 V 11,5 Kg / 25,4 lbs
UQ18CD0000 Main Electrical Panel 1200 W -230 V 11,5 Kg / 25,4 lbs