Carel humiSteam x-plus - Page 11

11
ENG
“UEX-PLUS” +03U0040EN - Rel. 1.35 - 10.05.2013
installeruserservice
Models UE001 to UE018 Models UE025 to UE130
B
A
A
B
C
D
Key:
A.
supply water inlet
B.
drain water outlet
C.
bottom tank drain water outlet (models UE025 to UE130 only)
D.
supply water inlet drain tempering valve.
Note: Double cylinder units UE090-130 have 2 drain tempering
connections
Fig. 2.b
Hydraulic interfaces dimensions
Interfaces dimensions drain/ ll
WATER DRAIN
WATER FILL
max pressure: 0:8MPA
dimensions mm (in) UE001 to UE018
D
72.6 (2.86)
D’
125.4 (4.94)
E
52.6 (2.07)
E’
107.5 (4.23)
Interfaces dimensions
steam outlet and condensed drain
dimensions mm (in) UE001 to UE018
F
126.7 (5)
F’
224 (8.82)
G
137.9 (5.43)
G’
21.7 (0.85)
Interfaces dimensions drain/ ll
dimensions mm (in) UE025 to UE045 UE045* to UE065 UE090 to UE130
I
40 (1.58)
I’
72 (2.83) 60(2.36)
I’’
10.2 (0.4)
I’’’
--- 78(3.1)
L
123.2 (4.85)
L’
231.2 (9.10)
L’’
49.1 (1.93)
L’’’
678 (26.7) 752(29.6) 672(26.5)
L’’’’
--- --- 833(32.7)
Interfaces dimensions
steam outlet and condensed drain
dimen.
mm (in)
UE025 to
UE045
UE045* to
UE065
UE090 to
UE130
M
172 (6.77) 223.7 (8.81)
M’
30.2 (1.19) 30.2 (1.19)
N
181 (7.13) 181 (7.13)
N’
--- 100 (3.94)
N’’
55 (2.17) 61 (2.40)
N’’’
--- --- 641(2.53)
N’’’’
--- --- 100 (3.94)
* 230 Vac models only