resort comfort base™
quick assembly guide
NO TOOLS REQUIRED FOR ASSEMBLY
RE SOR T C OM FO R T B AS E
™
US ER ’S M AN UAL
Please read and keep for future reference.
This manual contains important safety information.
(1x) User Manual
Use caution at pinch points while unfolding the base as parts may have shifted during shipping.
Unpack components for assembly:
(1x) Wireless
Back-Lit Remote
(3x) AAA Batteries
(6x) Four-Piece Adjustable Legs
(1x) Foot Retainer Bar
(2x) Wing-nuts per Base
(1x) Split Adj Base Sets
Connecting Strap
(Only included with
Twin XL/CKS bases)
(1x) Master Control Box
(Already installed under base)
(1x) Back-Up Battery Pack
(1x) AC/DC Power
Adapter per Base
(1x) Power Cord
Input Voltage
100-240V per Base
step 1: power cord set up
CAREFULLY open the adjustable
bed base into an L position on its
side or lay flat with the bottom
facing up. This step may require two
adults for safety.
Ensure all power cord connections
circled to the right are completely
plugged-in.
Installation of the Backup Battery
Pack is optional. Only put batteries
into the Backup Battery Pack during
an electrical outage and after the
power cord is unplugged from a
power source. Leaving in the 9 Volt
batteries in the Emergency Battery
Back Up Box after power has been
restored will cause the electrical
components to short out and
damage the master controller.
Battery Pack
Adapter per Base
(1x) Power Cord
Input Voltage
100-240V per Base
(1x) Master Control Box
(Already installed under base)
To Next Page
Need help?
General
