Carisma CTX-8000 - Receiver Unit Setup Procedures; Battery Type and ESC Mode Selection; ESC Calibration Process

ENTER SETUP MODE
SETUP FLOW CHART
Pull the Throttle Trigger to Max. Forward
position to toggle Battery type
Display CURRENT Battery type instantly
RED LED ON = LiPO Battery
BLUE LED ON = NiHM Battery
RECEIVER UNIT (MRS-540BL) FUNCTIONS
1
5
1
2
4
Power ON the Transmitter
BLUE LED ON
(Indicate “Select Battery Type”)
HOLD the Throttle Trigger to
Max. Forward Position
Power ON Receiver Unit(MRS-540BL)
3
HOLD the Throttle Trigger until
RED & BLUE LED Alternatively
Flashing with a “BEEP” sound
Release Throttle Trigger
BATTERY TYPE SELECTION MODE
RED LED ON
(Indicate “Calibration Mode”)
CALIBRATION MODECALIBRATION MODE
RED and BLUE LED ON
(Indicate “Select ESC Mode”)
ESC SPORT / RACING MODEESC SPORT / RACING MODE
2
Pull the Throttle Trigger to Max.
Forward position and then release
After
4 Second
After
4 Second
Neutral
Position
Flashes
3 times with
3 “BEEP”
Sound
Power OFF the Receiver Unit to Escape
from Setup mode.
4
Pull the Throttle Trigger to Max. Forward position.
RED LED OFF and BLUE LED Flashes
Then BLUE LED OFF and RED LED FLASHES Pull the Throttle Trigger to
Max. Forward position. RED LED SOLID ON with a “BEEP” sound and BLUE
LED FLASHES Max Forward has been set.
Push the Throttle Trigger to Max. Reverse position.
RED and BLUE LED SOLID ON with a “BEEP” sound.
Max. Reverse has been set.
Release Throttle Trigger to Neutral position
BLUE LED SOLID ON with a “BEEP” Sound, then
Throttle Neutral Position has been set.
Release Throttle Trigger to Neutral position
RED and BLUE LED FLASHES 3 times with 3 “BEEP” sound.
Calibration has been completed.
Pull the Throttle Trigger to Max. Forward position to toggle ESC mode. When
ESC mode is selected, RELEASE Throttle Trigger.
After 4 second, RED and BLUE LED FLASHES 3 times with
3 “Beep” sound. ESC mode setup has been completed.
Power OFF the Receiver Unit to
Escape from Setup mode.
Power OFF the Receiver Unit to Escape
from Setup mode.
6
Display CURRENT ESC Mode instantly
Sport Mode : BLUE LED ON =
Forward/Reverse with Smart Brake
Racing Mode : BLUE LED FLASHES =
Forward Only with Brake
APPROX 2 sec.
APPROX 2 sec.
APPROX
2 sec.
1. When Battery type has been Selected, RELEASE the Throttle Trigger to
Neutral position.
2. After 4 second, selection made with RED and BLUE LED Flashes 3 times
with 3 “BEEP“ sound, Battery Select has been completed.
2
3
“BEEP”
5 4
31
6
1
2
5 4
3
Pull
Neutral
Position
Pull
“BEEP”
FlashesFlashes
Push
Neutral
Position
Flashes
3 times with
3 “BEEP”
Sound
FlashesFlashes
2
4
1
3
Sport ModeSport Mode
Pull and
Release
Racing Mode
Racing Mode
Neutral
Position
Flashes
3 times with
3 “BEEP”
Sound
After
4 Second
After
4 Second
If fail to Bind, suggest to repeat from begin to try again
“BEEP”
“BEEP”