EasyManua.ls Logo

CARLO GAVAZZI DAA01 - User Manual

CARLO GAVAZZI DAA01
2 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation instructions
Electronic timers
DAA01, PAA01
DAA71
DMB01, PMB01
DMB51, DMB71
Code 8022310/161023 INSTRUCTION SHEET
XAAX1_XMBX1_XBAX2_RENEWAL_V2
www.gavazziautomation.com
Scan to read me in your language!
Scannen Sie, um mich in Ihrer Sprache zu
lesen!
Scanne pour me lire dans ta langue !
¡Escanea para leerme en tu idioma!
Scansiona per leggermi nella tua lingua!
Scan for at læse mig på dit sprog!
扫码后选择相关语言进行阅读！
Connections
L(+)
N(-)
µ µ
A1
15
25
16
26
18
28
A2
DAA01C...
DAA01D
DAA01D...
DAA71D
DAA
10
11
1
2
3
4
9
5
6
7
8
L(+)
N (-)
µ
L(+)
N(-)
µ
2
1
10
4
3
8
9
1 11
PAA01C...
PAA01D
PAA01D...
PAA
Keep power OFF while connecting!
L(+)
N(-)
µ µ
A1
15
25
16
26
18
28
A2
DMB01C...
DMB01D...
DMB51C...
DMB01D...
DMB71D
S
Y1
DMB
10
11
1
2
3
4
9
5
6
7
8
L(+)
N (-)
L(+)
N(-)
µ µ
2
1
11
4
8
3
9
10
S
5
PMB01C...
PMB01D...
PMB01D...
PMB
Connect the power supply to the proper terminals. Connect the trigger input S between terminals
A1 and Y1 (DBA52 and DMBX1 versions only). Connect the relay output according to the ratings as
shown in the side diagrams.
DAA, DMB PAA, PMB
Terminals
Tightening torque
A1, A2 2, 10 Power supply
A1, Y1 2, 5
Trigger input
(DMB, PMB)
15, 16, 18 1, 3, 4 Relay output
25, 26, 28 8, 9, 11
2nd relay output
(DAA01D, DAA71, PAA01D, DMB01D,
PMB01D)
Y1, A2 5, 10 Additional load (DMB, PMB)
Each terminal can accept up to 2.5 mm
2
wires for DAA71, DMB51 and
DMB71 and 2 x 2.5 mm
2
wires for DAA01 and DMB01.
DAA01, DMB01
DAA51, DAA71,
DMB51, DMB71
DMB01
PMB01
DMB51
DMB71
DAA01
PAA01
DAA51
DAA71
Settings
Select the desired time range by the lower dial on front as shown on the left.
Adjust the time period on relative scale: 1 to 10 with respect to the chosen range, setting the centre knob as shown on the left.
XAA01D and XMB01DM24B002: select the desired function of the second relay output by the DIP-switch on the front (OFF=delayed according to the
first relay, ON= instantaneous).
DMBX1 and PMB01: select the desired function by the upper knob as shown on the left:
Op: Delay on Operate
In: Interval
Io: Interval on trigger open
Id: Double Interval
Dr: Delay on release
R: Symmetrical recycler (ON first)
Rb: Symmetrical recycler (OFF first)
ON
ON:
instantaneous
OFF:
delayed
according to
the first relay
Adjustment
Check if the connections are correct. Turn the
power supply ON, the green LED switches ON.
The working mode, according to the selected
function, is schematized on the side label.
The yellow LED is ON when the relay is ener-
gized, it blinks slowly during timing and blinks
fast in case of wrong set-up.
Mounting
Hang the device to the DIN-Rail being sure that
the spring closes. Use a screwdriver to remove
the product.
Packaging
The packing material should be kept for redeliv-
ery in case of replacement or repair.
CE-marking and approvals
Question and Answer IconNeed help?

Do you have a question about the CARLO GAVAZZI DAA01 and is the answer not in the manual?

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Usage Features
  4. Maintenance Features

This document describes a range of electronic timers, specifically the DAA01, PAA01, DAA71, DMB01, PMB01, DMB51, and DMB71 series. It provides installation instructions, connection diagrams, settings, adjustment procedures, mounting details, packaging information, CE-marking, and approvals, along with general warnings and UL notes.

Function Description:

These electronic timers are designed for various timing functions in industrial applications. They offer different operating modes, including Delay on Operate (Op), Interval (In), Interval on trigger open (Io), Double Interval (Id), Delay on release (Dr), Symmetrical recycler (ON first) (R), and Symmetrical recycler (OFF first) (Rb). The specific function selection depends on the model, with some models (DMBX1 and PMB01) using an upper knob for selection, while others (XAA01D and XMB01DM24B002) utilize a DIP-switch for the second relay output function (OFF=delayed according to the first relay, ON=instantaneous).

The timers feature a lower dial on the front for selecting the desired time range and a centre knob for adjusting the time period within that range (1 to 10 on a relative scale). The working mode, corresponding to the selected function, is schematized on a side label. A green LED indicates power supply ON, and a yellow LED indicates relay energization. The yellow LED blinks slowly during timing and blinks fast in case of a wrong set-up, providing visual feedback on the device's status and potential issues.

Important Technical Specifications:

  • Connections:
    • Power Supply: Terminals A1, A2 (DAA, DMB) or 2, 10 (PAA, PMB).
    • Trigger Input (S): Terminals A1, Y1 (DAA, DMB) or 2, 5 (PAA, PMB) for DBA52 and DMBX1 versions only.
    • Relay Output: Terminals 15, 16, 18 (DAA, DMB) or 1, 3, 4 (PAA, PMB).
    • Second Relay Output: Terminals 25, 26, 28 (DAA, DMB) or 8, 9, 11 (PAA, PMB) for DAA01D, DAA71, PAA01D, DMB01D, PMB01D models.
    • Additional Load: Terminals Y1, A2 (DMB) or 5, 10 (PMB).
  • Wire Compatibility:
    • DAA71, DMB51, DMB71: Up to 2.5 mm² wires per terminal.
    • DAA01, DMB01: 2 x 2.5 mm² wires per terminal.
  • Tightening Torque:
    • DAA01, DMB01: Max 0.5 Nm.
    • DAA51, DAA71, DMB51, DMB71: Max 0.8 Nm.
  • UL Notes:
    • Pollution Degree: Devices must be installed in a pollution degree 2 environment or better.
    • Conductor Type: Use 60 or 75°C copper (CU) conductor.
    • Wire Size:
      • DAAX1 DMBX1 DBA52: No. 30-12 AWG, stranded or solid.
      • DAA01 DMB01: No. 30-14 AWG, stranded or solid.
    • Terminal Tightening Torque (UL):
      • DAAX1 DMBX1 DBA52: 4 to 7 Lb-In.
      • DAA01 DMB01: 4.4 Lb-In.
    • Overvoltage Category: These devices are Overvoltage Category III, suitable for use in circuits where devices or systems (including filters or air gaps) control overvoltages at a maximum rated impulse withstand voltage peak of 4.0 kV. Devices or systems must be evaluated using UL 1449.
    • UL61010 Compliance: PAA01 PMB01 models must be used with Carlo Gavazzi ZPD11, ZPD11A, or ZPD11XA DIN Rail Sockets.

Usage Features:

  • User Interface: Intuitive dial and knob controls for time range and period selection. Visual indicators (green and yellow LEDs) provide clear feedback on power status, timing progression, and potential errors.
  • Mounting: Designed for DIN-Rail mounting, ensuring secure installation. Removal requires a screwdriver to release the spring mechanism.
  • Safety: Emphasizes disconnecting power before installation and ensuring installation by qualified personnel. Incorporates a readily accessible overcurrent protection (fuse or circuit breaker) in the building installation wiring.
  • Multilingual Support: The manual is available in multiple languages, accessible via a QR code, facilitating understanding for a diverse user base.

Maintenance Features:

  • Troubleshooting: The blinking pattern of the yellow LED (slow during timing, fast for wrong set-up) aids in quick identification of operational issues.
  • Packaging: The packing material should be retained for potential re-delivery in case of replacement or repair, promoting responsible handling of the product.
  • Disposal: Users are instructed to dispose of the product at specified recycling centers according to government or local public authorities, promoting environmental responsibility.
  • Warranty and Service: In case of malfunction, fault, or for warranty information, users are directed to contact their local CARLO GAVAZZI branch or distributor.
  • Documentation: The instruction manual is an integral part of the product, intended to be consulted for all installation and use situations, and should be kept accessible, clean, and in good condition.

CARLO GAVAZZI DAA01 Specifications

General IconGeneral
BrandCARLO GAVAZZI
ModelDAA01
CategoryTimer
LanguageEnglish