Need help?Do you have a question about the CARLO GAVAZZI UWP 3.0 and is the answer not in the manual?
General| Brand | CARLO GAVAZZI |
|---|---|
| Model | UWP 3.0 |
| Category | Gateway |
| Language | English |
Details the UWP 3.0 as the central Linux-based embedded PC for monitoring and control.
Explains the two local buses: High-Speed bus (local bus 1) and USB bus (local bus 2).
Covers RS485 ports, Modbus master/slave capabilities, and energy meter connections.
Details UWP 3.0's role as BACnet server and Modbus/TCP master/slave.
Explains the bus generator concept for extending system connectivity.
Introduces the Dupline bus, its generators, and methods to extend network reach.
Provides guidelines for Dupline bus cabling, routing, splices, and installation planning.
Guides on determining the number of Dupline bus generators based on module limits.
Refers to external documentation for the WiDup wireless system.
Details connecting the SH2DSP24 USB dongle modem for internet access.
Step-by-step guide to connect the SH2DSP24 USB dongle connection module.
Explains Ethernet port usage for field bus and LAN/WAN connections.
Describes using a Micro SD card to change the UWP 3.0 IP address.
Explains using a USB stick to modify the UWP 3.0 IP address.
Guides on calculating UWP 3.0 system power requirements for PSU selection.
Details the correct wiring of the DC power supply and associated safety tips.
Outlines the overall steps for installing a smart-building system with UWP 3.0.
Provides technical guidelines for RS485 network implementation, including cable, grounding, and topology.
Lists important safety information for installation, operation, and maintenance.
To Next Page
