EasyManuals Logo

Carlson Surveyor 2 User Manual

Carlson Surveyor 2
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
PICTURES & VIDEOS CONTROL PANEL
To view or change additional settings, select Options from the Menu soft key. The Camera control
panel is shown. Use the horizontal scrolling menu near the top of the screen to see what the
setting are and make changes as needed.
GEOTAGGING
When pictures are geotagged, the date, time, latitude, longitude, file name, and notes can be
included with the pictures with the emboss and embed options.
Note: Calibrate the compass and accelerometer before you use Geotagging. Refer to Chapter 3,
Programs and Settings, Compass and Accelerometer Calibration.
Follow these steps:
1. Turn on GPS by selecting the GPS gadget on the Home screen and waiting for a fix.
2. Select the Menu soft key, then select Geotag from the menu. The following Emboss
Options screen is shown:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Carlson Surveyor 2 and is the answer not in the manual?

Carlson Surveyor 2 Specifications

General IconGeneral
BrandCarlson
ModelSurveyor 2
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals