Caroma G Series - Maintenance and Parts; Filter Cleaning Procedure

To Next Page

To Previous Page

MAINTENANcE

Filter cleaning instructions

This mixer or tap is provided with one / two stainless steel filter washer(s)

preventing foreign particles from entering the lines. If the water flow has

decreased, this can be because the filter washer(s) is/are clogged. The filter

washer(s) can be cleaned as follows:

1. Shut-off the water isolating stop taps.

2. Disconnect the flexible tail(s).

3. Remove the filter washer(s) and wash it/them under running water.

4. Reassemble the parts.

5. Make sure that there is no water leakage.

Care and cleaning of chrome and special finishes

DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or

the like. Use of any prohibited cleaning or maintenance products or substances

could damage the surface of the mixer or tap. For surface cleaning of mixer or

tap use ONLY soap and water, then wipe dry with clean cloth or towel. When

cleaning bathroom tile, the mixer or tap should be protected from any splattering

of harsh cleansers.

SPARE PARTS LIST

Remote control

IP67 Dual Power Input Box

Solenoid

G Series Hands Free Power Supply 9V

Code. SP16012

Code. SP63027

Code: SP63019

Code: SP63026

Other manuals for Caroma G Series