Installing the Cistern - 237 002
Custom Panel Access
The minimum front access requirements
for servicing cistern internal are:
The minimum top access requirements
for servicing cistern internal are:
The minimum front access requirements
for cistern removal are:
400mm
520mm
50mm
195mm
90mm
100mm Min.
195mm
90mm
1. The design of the custom panel
is limited only by the designers
imagination.
2. Cistern must be mounted using the
attached Mounting Brackets. Refer
to appropriate installation method on
previous pages.
3. Allowances for access to at least the
cistern internals if not the entire cistern
must be incorporated into the design.
4. Check cistern and all joints for leaks.
5. Turn Isolating Tap OFF. Continue
with Preparation for Fitout on page 15.
To Next Page
Loading...
