Caroma Invisi Series II - Button Service Access Options

INVISI
™
SERIES II
INVISI
™
SERIES II
Button Service Access Options
5
Direct Panel Mounting - Front
Thisissuitableforusewithanyofthe
buttonpanelkits.
Requiresa0.2"(5mm)minimum-
1.8"(45mm)maximumwallthickness.
Access to the tank internals is
provided through the panel window.
Remote Panel Mounting
Thisissuitableforusewithanyofthe
buttonpanelkits.
Requiresa0.2"(5mm)minimum-
1.8"(45mm)maximumwallthickness.
A Blank Access Panel is required for
inwall access to tank internals.
Remote Button Mounting
Accesstotherearofthebuttonsmust
beprovidedforservicing.
Suitableformountingthroughpanels
upto2.2"(55mm)thick.
A Blank Access Panel is required for
inwall access to tank internals.
Care Button Panel
ACareButtonPanelisavailablefor
use in ADA applications.
Direct Panel Mounting - Top
Thisissuitableforusewithanyofthe
buttonpanelkits.
Requiresa0.2"(5mm)minimum-
1.8"(45mm)maximumwallthickness.
Access to the tank internals is
provided through the panel window.