6200 series Operations Manual Rev D 2/14/2012 Page 44 of 60
4. Press the FUNC button and ‘CHRT SPD’ will show
5. Use the up and down arrow keys to select one of the standard settings (8 hr, 12
hr, 24 hr, 7 days) or ‘x HR’ to specify a unique speed.
6. If specifying a unique speed, press the FUNC button and use the up and down
arrow keys to set the chart speed in hours (6 to 744).
7. Press the LOWR DISP button to return to the main display.
8. Press the CHART button to start recording at the new speed.
9. Close the door.
To Next Page