54
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
SAFETY GUIDELINES
Model No. CP635 contact us 1-888-666-1887
Operating pressure
Working Air Hose
Dimensions
(Length*Height*Width)
Net Weight
Nail capacity
Nail Spec.
Air consumption
Air inlet
CFM: Cubic feet per minute refers to the volumetric flow of air. This information Is used to
determine the proper compressor to suit your needs.
NPT: National Pipe Thread.
PERSONAL SAFETY
These precautions are intended for the personal safety of the user and others working
with the user. Please take time to read and understand them.
Make sure you read and understand this manual before using this tool. Make sure other
users read and understand this manual before they use the tool.
SAFETY GUIDELINES
This manual contains information that relates to PROTECTING PERSONAL SAFETY and
PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully
and understand it thoroughly before using the product. The symbols listed below are used to
indicate this information.
70 – 100 psi (4.8 – 6.9bar 4.9 – 7 kgf/cm²)
Air hose inner diameter of 7mm and length no more than 30 meters
9.9"(L)x7.4"(H)x2.4"(W)
(251mmx189mmx61mm )
2.38 lbs (1.08kg)
100 nails (1 strip)
5/8" - 1-3/8"
0.01 ft3/cycle at 90 psi
(0.29 ltr/cycle at 6.9 bar)
(0.29 ltr/cycle at 7 kgf/cm2)
1/4 NPT Thread
DANGER!
Potential hazard that could result in serious
personal injury including possible death.
WARNING!
Potential hazard that could result in serious
personal injury to the tool user or others in the
work area.
CAUTION!
Potential hazard that could result in damage
to the tool or property.
To Next Page
Loading...