Carrier TRANSICOLD PowerLINE 69RG15 Series User Manual (English)

Questions and Answers:

M
Melanie NelsonAug 7, 2025
Why is my Carrier TRANSICOLD Industrial Equipment overheating?
- J
  Jesse SantosAug 7, 2025
  Overheating in Carrier TRANSICOLD Industrial Equipment can occur due to several reasons. Check for air cleaner restriction as described in Section 6.4.11, remove any exhaust pipe restriction, and inspect for radiator restriction as outlined in Section 6.4.5. Ensure the coolant level is adequate, referring to Section 2.9. Also, verify the water pump and alternator poly V-belt are properly tightened, as detailed in Section 6.4.10.
J
John AndersonAug 14, 2025
Why is my Carrier TRANSICOLD Industrial Equipment losing power?
- Z
  Zachary RoseAug 14, 2025
  Loss of power in your Carrier TRANSICOLD Industrial Equipment can be caused by several factors. Ensure the air vent is not restricted by cleaning it. If the air cleaner has a restriction, consult Section 6.4.11. If there is air in the fuel system, refer to Section 6.4.11.
E
Erika MullenAug 22, 2025
What to do if the fuel solenoid does not energize in Carrier TRANSICOLD PowerLINE 69RG15 Industrial Equipment?
- J
  John RobersonAug 22, 2025
  If the fuel solenoid in your Carrier TRANSICOLD Industrial Equipment isn't energizing or staying energized, here's what you can check: * Ensure the battery is not defective and correct if necessary. * Tighten any loose electrical connections. * Refer to Section 1.9 for instructions on checking the oil pressure switch and water temperature safety switch. If these steps don't resolve the issue, the fuel solenoid itself, the intake heater switch, or the electronic governor module (EG) might be defective. Consult the Engine Manual for the fuel solenoid and intake heater switch, and check/replace the EG module as described in Section 6.4.14.
R
Richard VelazquezAug 29, 2025
What causes excessive crankcase pressure in Carrier TRANSICOLD Industrial Equipment?
- S
  Sabrina HendersonAug 29, 2025
  If there's excessive crankcase pressure in your Carrier TRANSICOLD Industrial Equipment, check if the crankcase breather line is plugged, as described in Section 6.4.12.

Carrier TRANSICOLD PowerLINE 69RG15 Series Specifications

General

Brand	Carrier TRANSICOLD
Model	PowerLINE 69RG15 Series
Category	Industrial Equipment
Language	English

Summary

Section 1 Safety Summary

1.1 General Safety Notices

General safety notices supplement specific warnings and cautions appearing elsewhere.

1.3 Operating Precautions

Precautions to follow during operation, such as safety glasses, keeping clear of moving parts.

1.4 Maintenance Precautions

Precautions to follow during maintenance, such as disconnecting power and battery.

Section 2 Description

2.1 Introduction

Overview of the Carrier Transicold model 69RG15 Series 22 diesel-driven generator set.

2.2 Configuration Identification

Information on unit nameplate, model number, serial number, and parts identification number (PID).

2.3 Alternating Current Generator

Details on the AC generator, its connection to the engine, and power supply characteristics.

2.4 Engine

Details of the vertical, in-line, four-cylinder diesel engine (Kubota V2203-DI).

2.4.2 Electronic Governor

Function and components of the electronic governor module (EG) for engine speed control.

2.4.5 Engine Cooling System

Function of the cooling system, radiator, water pump, fan, and temperature monitoring.

2.6 Control Panel and Control Box Components

Components for monitoring and controlling the generator set, including gauges and switches.

2.8 Safety Devices

Devices like circuit breakers, fuses, and safety switches that protect system components.

2.9 Unit Specifications

Technical specifications for the fuel tank, generator, and engine.

Section 3 Installation

3.1 Installation

Procedures for mounting the generator set onto the container using pin type brackets.

3.2 Removal

Procedures for safely removing the generator set from the container.

Section 4 Operation

4.1 Starting and Stopping Instructions

Guidelines for starting and stopping the generator set unit.

4.1.2 Starting Instructions

Step-by-step procedure for starting the generator set, including preheat times.

Section 5 Troubleshooting

5.1 Diesel Engine

Troubleshooting common issues related to the diesel engine starting and running.

5.3 Alternating Current Generator

Troubleshooting issues related to the AC generator output, voltage, and noise.

5.5 Voltage Controller

Troubleshooting issues with the voltage controller based on indicator light status.

5.6 High Voltage Circuit, Electrical Troubleshooting

Troubleshooting electrical issues in the high voltage circuits, including receptacle and breaker.

Section 6 Service and Preventative Maintenance

6.2 Preventative Maintenance Schedule

A tabular list of recommended preventative maintenance activities and their schedules.

6.4 Engine Service and Components

Procedures for servicing engine components such as fuel system, lubrication, and air cleaner.

6.4.10 Servicing the Poly V-belt

Instructions for inspecting, replacing, and adjusting the poly V-belt.

6.4.11 Engine Air Cleaner

Service procedures for the engine air cleaner, including element replacement.

6.5 Servicing the AC Generator

Procedure for removing and replacing serviceable parts of the AC generator.

6.6 General Generator Set Maintenance

Maintenance procedures for painted surfaces and shockmounts.

6.6.2 Checking and Replacing Shockmounts

Procedure for inspecting and replacing engine/generator shockmounts to prevent damage.

Section 7 Schematics

7.1 Schematic Legend

Legend for symbols used in the electrical schematics.

7.2 Schematic 12VDC Control Circuit

Diagram of the 12-volt DC control circuit for the generator set.

7.3 Schematic High Voltage Circuitry

Diagram of the 460-volt AC high voltage circuitry for the generator set.

Carrier TRANSICOLD PowerLINE 69RG15 Series User Manual

Table of Contents