Carrier 160 Series - Page 15

Ya" (6mm) THREADED ROD
4 REQ.
Wy}
-----
|
ZZ xr
OUTER DOOR Zee
ASSEMBLY Para
a
Ze
ar
a
Lae
aor
ae >
aa 1S)
2e7 SECURE ANGLE ve]
<a iw
z IRON TO BOTTOM
ZA OF FURNACE WITH
3 #8 x9/s" (19mm) SCREWS
TYPICAL FOR 2 SUPPORTS
8" (203mm) MIN
FOR DOOR REMOVAL
1” (25mm) SQUARE, 1-1/4"x1-1/4"x1/8” (82x32x3mm)
ANGLE IRON OR UNI-STRUT MAY BE USED
(2) HEX NUTS, (2) WASHERS & (2) LOCK WASHERS
REQ. PER ROD
A10130
Fig. 15 - Horizontal Unit Suspension
\\ 22 GAUGE GALVANIZED
STRAPS TYPICAL
FOR 4 STRAPS \
i
(\ AIR
OPENING
ouren.2o0n Menon 2
Pp USE (4) #8 x 3/4 (19 mm) SHEET
METAL SCREWS FOR EACH
STRAP. THE STRAPS
SHOULD BE VERTICAL
AGAINST THE FURNACE
SIDES AND NOT PULL AWAY
FROM THE FURNACE
SIDES.
BACK OF
FURNACE
METHOD 4
4 FOLD ALL STRAPS UNDER
FURNACE AND SECURE WTH
a (4) #8 x 3/4 (19 mm) SHEET METAL SCREWS
(2 SCREWS IN SIDE AND 2 SCREWS
IN BOTTOM).
AIR OPENING
A10134
Fig. 16 - Horizontal Suspension with Straps