LEGEND
1M — Main Starter Contactor
C—Contactor
CB — Circuit Board
CR — Control Relay
COMM — Communications Connector
J—Connector
N.C. — Normally Closed
N.O. — Normally Open
OL — Overload
OS — 3-Phase Current Power Source
PR — Pilot Relay
PWR — Power
RLA — Rated Load Amps
SMM — Starter Management Module
TB — Terminal Board
X—Variable Number
Starter Cabinet Wiring
Field Wiring
Carrier Factory Wiring
*All starters, including across-the-line starters, require 2 separate contacts for the START AUX
DRY contact and RUN AUX DRY contact, as shown above.
Fig. 50 — Chiller Power Panel, Starter Assembly,
and Motor Wiring Schematic
94
To Next Page
Loading...
