17
COMBINATION RATINGS CONTINUED
U n i t S i z e ---
Voltage,
Series
Indoor
Model
To t a l Ca p .
BTUH
Factory
Supplied
Enhancement
SEER
EER
Furnace
Model
Standard
Rating
TDR{
60---32/33
60---52/53
60---62/63
CSRH*6012A* * 57,000 TXV 13.00 11.00
CSRH*6012A* * 56,500 TDR&TXV 13.20 11.00 58CV(A,X)135---22
CSRH*6012A* * 56,500 TDR&TXV 13.50 11.20 58CV(A,X)155---22
FA4CN(F,C)060 56,500 TDR&TXV 13.00 11.00
FC4DN(F,B)060 57,500 TDR&TXV 13.20 11.00
FK4DNB006 57,000 TDR&TXV 13.50 11.20
* Tested combination
{ In most cases, only 1 method should be used to achieve TDR function. Using more than 1 method in a system may cause degradation in performance. Use
either the accessory Time---Delay Relay KAATD0101TDR or a furnace equipped with TDR. Most Carrier furnaces are equipped with TDR.
EER — Energy Efficiency Ratio
SEER — Seasonal Energy Efficiency Ratio
TDR — T i m e --- D e l a y R e l a y
TXV — Thermostatic Expansion Valve
NOTES:
1. Ratings are net values reflecting the effects of circulating fan motor heat. Supplemental electric heat is not included.
2. Tested outdoor/indoor combinations have been tested in accordance with DOE test procedures for central air conditioners. Ratings for other
combinations are determined under DOE computer simulation procedures.
3. Determine actual CFM values obtainable for your system by referring to fan performance data in fan coil or furnace coil literature.
4. Do not apply with capillary tube coils as performance and reliability are significantly affected.
24ABR3
To Next Page
Loading...
