Carrier 24ACC6 Performance - Tested AHRI Combination Ratings

12
TESTED AHRI COMBINATION RATINGS*
NOTE: Ratings contained in this document are subject to change at any time.
For AHRI ratings certificates, please refer to the AHRI directory www.ahridirectory.org
Additional ratings and system combinations can be accessed via the Carrier database at:
http://cactaxcredits.info/carrier-ratings/ac_ratings_sr
ch.php
Equipment performance calculator can be accessed at:
http://rpmob.wrightsoft.com/
Model Number Indoor Model Furnace Model Capacity EER SEER
24ACC618A**30 CNPV*1917A**+TDR 18,000 12.0 14.5
24ACC624A**30 CNPV*3117A**+TDR 23,600 12.0 14.5
24ACC630A**30 CNPV*3117A**+TDR 28,600 12.0 14.5
24ACC636A**30 CNPV*3717A**+TDR 34,400 12.0 14.5
24ACC642A**30 CNPV*4324A**+TDR 41,500 12.0 14.5
24ACC648A**30 CNPV*6124A**+TDR 46,500 12.5 14.5
24ACC660A**30 CNPV*6124A**+TDR 55,000 12.5 14.5
* AHRI = Air Conditioning, Heating & Refrigeration Institute
EER — Energy Efficiency Ratio --- ’A’ conditions --- 80_F(26.6_C) indoor db/67_F (19.4_C) indoor wb & 95_F(35_C) outdoor wb.
SEER — Seasonal Energy Efficiency Ratio
TDR — Time---Delay Relay. In most cases, only one method should be used to achieve TDR function. Using more than one method in a system may cause degradation in
performance. Use either the accessory Time ---Delay Relay, KAATD0101TDR, or a furnace equipped with TDR. Most Carrier furnaces are equipped with TDR.
NOTES:
1. Ratings are net values reflecting the effects of circulating fan motor heat. Supplemental electric heat is not included.
2. Tested outdoor/indoor combinations have been tested in accordance with DOE test procedures for central air conditioners. Ratings for other
combinations are determined under DOE computer simulation procedures.
3. Determine actual CFM values obtainable for your system by referring to fan performance data in fan coil or furnace coil literature.
4. Do not apply with capillary tube coils as performance and reliability are significantly affected.
24ACC6