Table 2
-
Electrical Data
60 HERTZ
50
HERTZ
FLA
-
Full Load Amps *Units are suitable for use on electrical systems where voltage
ICI=
-
Maximum Instantaneous Current Flow during starting
(the point in the starting seqtience where the sum of
supplied to unit terminals is not below or above listed minimum
and maximum timits.
TAll
fans are protected by a single circuit breaker.the
IRA
for the starting compressor, plus the total
RLA for all running compressors, plus the total FLA
for all running fan motors is maximum).
LRA
-
Locked Rotor Amps
MCA
-
Minimum Circuit Amps (complies with National Elec-
trical Code [NEC], Section 430-24)
MOW
-
Maximum Overcurrent Protection
RLA
-
Rated Load Amps
To Next Page
Loading...
