Carrier 30KAV-ZE Series - 30 Kav-Ze 1000 A; 30 KAV-ZE 1100 A; 30 KAV-ZE 900 A - Opt 119

3 - DIMENSIONS, CLEARANCES
3.13 - 30KAV-ZE 1000A
2261 HT
10347 HT
1500
1500
1500
1500
2325 HT
500
500
500
500
B
B
B
B
C
C
C
C
3.14 - 30KAV-ZE 1100A; 30KAV-ZE 900A - opt 119
2261 HT
11541 HT
1500
1500
1500
1500
2325 HT
500
500
500
500
B
B
B
B
C
C
C
C
Key
NOTE:
Non-contractual drawings.
Refer to the unit name plate to nd out the machine weight.
Refer to the certied dimensional drawings (appendix 4),
provided with the unit or available on request, when
designing an installation.
Please refer to the certified dimensional drawings
(appendix 4) for the positioning of the xing points, weight
distribution points and centre of gravity coordinates.
If the installation comprises several units or if these are
located close to walls, refer to sections 2.4 - Proximity to
walls and 2.6 - Installation of multiple chillers, to determine
the space required.
All dimensions are given in mm
B
Clearances required for maintenance (see Note)
C
Potentially ammable zone around the machine
Water inlet for standard units
Water outlet for standard units
Air outlet, do not obstruct
Power supply connection
Sling points
21