NOTES:
1. Unit must have clearances as follows:
Top — Do not restrict.
Sides and End — 6 (1.8 m) from solid surface.
Airflow side — 82.4 mrequired for coil service area.
2. All pumps have drains located at the bottom of volute for draining.
3. Temperature relief devices located on suction line, liquid line and filter drier
of each circuit and have
1
/
4
flare connection.
4. No pump package leaving water connection is same size and has same Y
and Z dimensions as entering water. Also has same PDx dimension as
pump package.
5. Dimensions are in mm [inches].
a30-5333
MCHX — Microchannel Condenser Coil
Fig. 8 — 30RB120, 130 Air-Cooled Chiller Dimensions
To Next Page
Loading...
