Carrier 30XAV - Alarms Menu Overview; Configuration Menu Categories

20
5.3 - Alarms menu
  
Reset Alarms Alarm reset
Current Alarms Current alarms
Alarm History Alarm history
Major Alarm History Major alarm history
*Depends on the selected language (English by default).

   
General Conguration General conguration GEN_CONF
Pump Conguration Pump conguration PUMPCONF
User Conguration User conguration USERCONF
Reset Conguration Reset conguration RESETCFG
Schedule Menu Schedule menu SCHEDULE
Holiday Menu Holiday menu HOLIDAY
Broadcast Menu Broadcast menu BROCASTS
Date/Time Conguration Date/time conguration DATETIME
Control Identication Control identication CTRL_ID
*Depends on the selected language (English by default).
NOTE: Since specic units may not include certain options, some tables may contain parameters that cannot be
congured for a given unit.
GEN_CONF – General conguration
No. Status  Unit  
1 0 to 2 0 - Cir Priority Sequence Circuit priority
2
0=Auto
1=A Prio
0 = Automatic circuit selection
1 = Circuit A priority
3 2=B Prio 2 = Circuit B priority
4 0 to 1 0 - Staged Loading Sequence Staged loading sequence
5 no/yes 0 - Ramp Loading Select Ramp loading selection
6 1 to 15 1 min Unit O to On Delay Unit O to On delay
7 0 to 2 0 - Demand Limit Type Select Demand limit selection
8 0 = None 0 = None
9 1 = Switch Control 1 = Switch control
10 2 = 4-20mA Control 2 = 4-20 mA control
11 - - - Night Mode Start Hour Night mode start hour
12 - - - Night Mode End Hour Night mode end hour
13 0 to 100 100 % Night Capacity Limit Night capacity limit
14 0 to 1 0 - Power Limit select Power limit selection
15 0 to 1 0 - Ice Mode Enable Ice mode enabled
16 0 to 2000 2000 kW Maximum Power Limit Maximum power limit
17 0 to 1 0 - short cycle management Short cycle management
*Depends on the selected language (English by default).