Select Yes to copy the
previous day’s program
to this day.
Yes
No
If Yes is selected:
If No is selected:
The copy command becomes available after the maximum # of
occupied periods are programmed in a day. This example uses
only one occupied period.
Press
MODE
Tu
Page 6.4
occupied
Tu
Continued
Press
MODE
Press
MODE
Press
MODE
Press
MODE
occupied
Am
7:00
Tu
Start
occupied
6:00
Tu
Pm
Stop
Select the day
for Occupied 1.
(Tu - M)
Adjust the start time
for Occupied 1.
Adjust the stop time
for Occupied 1.
1
1
1
Selecting Yes, then pressing mode will copy the
previous day’s program. If yes is selected again,
or each time, this routine will repeat.
6
Carrier
To Next Page
Loading...
