Carrier 38AQS016 - System Specifications and Data; Model Number Nomenclature

4
Model number nomenclature
38AQS 008 – – – 5 0 1 – –
38AQS —
Split System Heat Pump
– – —
Not Used
Nominal Tons Packaging
008 —
7-1/2 Tons
0 —
Base Unit
012 —
10 Tons
1 —
Domestic
016 —
15 Tons
Revision Number
– – —
Not Used
0 —
Original
Condenser Coil Protection Options* Voltage Designation
–—
Aluminum (Standard)
1 —
575-3-60 (Sizes 012,016 Only)
C—
Copper
5 —
208/230-3-60
V—
Pre-Coated Aluminum Fins (008)
6 —
460-3-60
K—
Pre-Coated Aluminum Fins (012,016)
E-Coated Cu Fin/Cu Tube (012,016)
F—
E—
E-Coated Al Fin/Cu Tube (012,016)
*—
Post-Coated Aluminum (Contact Factory) (008 Only)
*—
Post-Coated Copper (Contact Factory) (008 Only)
40RM Q 016 – – B 5 0 1 GC
40RM — Commercial Packaged Factory-Installed Options
Air Handler GC — Unpainted, Standard Motor and
Standard Drive
Cooling Coil HC — Unpainted, Standard Motor and
Q — Heat Pump Medium-Static Drive
YC — Unpainted, Alternate Motor and
Nominal Capacity — Tons High-Static Drive†
008 —
7-1/2
ED — Painted, Standard Motor and
012 — 10 Standard Drive
016 — 15 FD — Painted, Standard Motor and
Medium-Static Drive
Not Used WD — Painted, Alternate Motor and
High-Static Drive†
Expansion Device
B — Thermostatic Expansion Valves Packaging
1 — Standard Domestic
Voltage Designation
1 — 575-3-60 Revision Number
3 — 208/230-1-60* 0 — Original Model
5 — 208/230-3-60
6 — 460-3-60
LEGEND
*Size 008 only.
Al —
Aluminum
Cu —
Copper
Quality Assurance
Approvals:
ISO 9001
EN 29002
BS5750 PART 2
ANSI/ASQC Q92
38AQS008 UNITS
38AQS012,016 AND 40RMQ UNITS
*Size 008 only.
†For 40RMQ008 units with single-phase motors, YC and WD options
denote standard motor and high-static drive.