38MBR: Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
20
EEPROM Parameter Error - Diagnosis and Solution (E0/F4)
Troubleshooting
EEPROM: A read-only memory whose contents can be erased and reprogrammed using a pulsed voltage. For the location of the EEPROM chip, refer
to the Fig. 18.
Fig. 18 — Outdoor PCB
Figure 18 is for illustration purposes only and may differ from your actual unit.
Error Code E0/F4
Malfunction decision conditions Indoor or outdoor PCB main chip does not receive feedback from EEPROM chip.
Supposed Causes
• Installation mistake
•PCB faulty
Power OFF.
Wait 2 minutes then power ON the unit.
Replace the indoor /outdoor main PCB..
Yes
To Next Page
Loading...
