Carrier 38MGRBQ18B-3 - DISASSEMBLY INSTRUCTIONS; Fan Assembly Removal

38MGRBQ: Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
80
DISASSEMBLY INSTRUCTIONS
This section is for reference, the images may differ from your actual unit.
N0. PART NAME PROCEDURES REMARKS
1 FAN ASSEMBLY REMOVE THE FAN
1. Turn off the air conditioner.
2. Turn off the power breaker.
3. Remove the 4 screws of the air outlet grille.
4. Remove the hex nut securing the fan.
5. Remove the fan.
6. Remove the top cover screws.
7. Remove the top cover.
8. Remove the electrical control box cover.
9. Disconnect the fan motor connector CN14 (3p,white) from
the IPM board.
10. Remove the fan motor after unfastening four fixing
screws.