Carrier 38MGRBQ18B-3 - DISASSEMBLY INSTRUCTIONS (CONT); Panel Plate Removal

38MGRBQ: Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
81
2
PANEL PLATE
REMOVE THE PANEL PLATE
1. Remove the 6 front panel screws.
2. Remove the front panel.
3. Remove the 4 handle screws.
4. Remove the handle.
5. Remove the two screws of the terminal board and seven
screws of the right-rear panel.
6. Remove the right-rear panel.
Front panel screws
Handle
screws
Terminal board
screws
Right rear
panel screws
Right - rear
panel screws